FLAMEX® EN 50382-2 FFS

Application

FLAMEX SI EN 50382-2 type FFS screened power cables are used for fixed installations where enhanced mechanical protection and electrical screening (EMC) is required. The insulation and sheath are designed with state-of-the art silicone materials to withstand high operating temperature and save weight on board of rolling stock equipment. FLAMEX cables are recommended for installations and connections in narrow spaces where an optimal bending radius is required. They provide optimum safety for people and maximal asset protection against all risks of fire.

Construction

• Conductor
  Flexible class 5 copper according to IEC 60228
  * tinned copper for 120°C Class
  * plain copper for 150°C Class
• Insulation
  Cross-linked silicone type EI 111 according to EN 50382-1
• Separator
  Unweaved tape
• Screen
  Tinned copper wire braid
• Separator
  Unweaved tape
• Outer sheath
  Cross-linked silicone type EM 107 according to EN 50382-1
  Colour: black outer layer

Marking

FLAMEX SI - EN 50382-2  - Voltage rate (1800V or 3600V) - cross-section mm² - FFS - temperature class (120°C or 150°C) - NEXANS 279 - week/year

Guide to use

Cabling rules are given according to EN 50343
- Minimum bending radius (static) : 4 x outer cable diameter
- Minimum bending radius (dynamic) : 6 x outer cable diameter
Pulling tensible force (dynamic) during installation : 50 N/mm² of copper size
Mechanical (static) tensible force : 15N/mm² of copper size
Permissible current carrying capacities : value and calculation method are given in EN 50355

Standards

Construction according to EN 50382-2